Hi Lift Jack

36" Hi-Lift® UTV Jack

HLUTV-364 $97.99

42" Hi-Lift® UTV Jack

HLUTV-364 $99.99

Click here for Hi-Lift® Accessories

The "original power tool" of the off-road market is now available to meet the ever-increasing demands of the UTV market with this specialized Hi-Lift® model.

Sized perfect for UTV operators… off-roaders, farmers, ranchers, search and rescue personnel, and the general outdoorsman.

WITH THE DEVELOPMENT OF THE NEW ADJUSTABLE TUBE MOUNTS, THE HI-LIFT® UTV JACK CAN BE MOUNTED EASILY AND SECURELY TO ANY ROUND OR SQUARE TUBING. ETHER ON THE FRONT or REAR BUMPERS, BULL BARS, ROLLCAGES AND ROOF RACKS ETC.

JACK COMPANY

FEATURES

 Sized right: 36" and 42" models.

 Lightweight: less than 30 lbs.

 Special attachment: standard top clamp-clevis replaced with winch/clamp/spreader tool.

 Special appearance: All black powder-coat jack and handle, gold zinc-coated hardware and attachment, special labeling.

The Hi-Lift® UTV Jack is superior to other aftermarket jacks…

It allows you to lift a UTV from many locations, instead of being limited to specific points under the UTV. It offers greater capacity with a 4,660 lb rated load limit, and outperforms other jacks in that it is a true "multi-purpose tool" that provides the ability to lift, winch, pull, spread, and clamp. It can be used in all conditions...water, mud, sand, and even snow.

36" Hi-Lift® UTV Jack
HLUTV-364 $97.99

42" Hi-Lift® UTV Jack

HLUTV-364 $99.99

JACK COMPANY

Specifications:

Approximate weight: 30lbs (14 kg)
4,660 lbs (2113.74 kg) rated capacity
Climbing pins of specially processed steel with 125,000 PSI tensile strength and 100,000 PSI yield.
Steel bar is manufactured of specially rolled extra high carbon steel with 80,000 pound minimum tensile & carbon .69 to .82.
Steel handle of 14gauge high-yield structural tubing with minimum yield of 55,000 PSI. 1 5/16" diameter x 30" long

Hi-Lift® Accessories

Polyurethane Handle Keeper For Hi Lift Jacks

Handle Keeper Red $14.99
HLHK-R

Handle Keeper Black $14.99
HLHK-B

The Handle Keeper is a "must have" for any Hi-Lift jack owner. Made of Polyurethane, it slips over the jack's "I" beam and jack handle to keep them parallel and secured together. In addition to securing the handle while in transport, it also acts as a "buffer" between the jack handle and the jack "I" beam eliminating clanging.

Eliminates "out of control" handles & that constant clanging
Easy & quick removal
Fits all Hi-Lift brand jacks
Available in two colors

Hi-Lift Off Road Base

HLORB $38.99

SINK NO MORE!

The Off-Road Base from Hi-Lift Makes the Original Power Tool Even More Versatile!

Convenient to use, Easy to Store.
Rugged construction meets Hi-Lift Jack specifications for Strength & Durability.
Use the Hi-Lift Off-Road Base to alleviate jack sinkage on soft ground.

Use the Off-Road Base with any model of Hi-Lift Jack.

Hi-Lift Adjustable Mounts For Square Or Round Tubing For The Hi-Lift UTV Jack

Tube Mount for 1"- 2" tubes

$67.99
HLTM-700

Tube Mount for 2"- 3" tubes

$69.99
HLTM-750

With the development of the new adjustable tube mounts, the Hi-Lift UTV Jack can be mounted easily and securely to any round or square tubing.... on the front, rear bumpers, bull bars, roll cages, roof racks, etc.

Universal Mounting Kit - Flat mounting surface

HL4X400 $29.99

The Hi-Lift 4XRAC is designed for an easy, inexpensive way to stow their Hi-Lift Jack in a convenient, secure location.
Each kit contains 2 mounting brackets, 2 mounting bracket caps, a Velcro strap for securing the Hi-Lift's handle and all necessary mounting hardware.

To contact us Email or phone us at

802 645 9100