Attaches to the back of the 1080p HD HERO
camera, allowing for up to 2X* extended record times
Plugs into any USB charging source to charge
your spare HD HERO batteries. Charges 960p and 1080p HD HERO camera batteries
Built in LED lights indicate battery power
status
Includes:
1 Battery BacPac
1 Li-Ion Battery
1 Waterproof Door for HD HERO Housing
1 Skeleton Door for HD HERO Housing
1 USB Cable
Warranty: One Year
*Note:
Actual battery life may vary
NOTE: Not compatible with the HD Hero 960 camera.
The Battery BacPac works as both a charger for your spare HD HERO
batteries and plugs into the back of the 1080p HD HERO camera to nearly double
record times. Perfect for long duration time-lapse photo sessions, endurance
motorsports racing or any application where you need up to 2X* the battery life.
HD LCD Bak Pac -- $79.99
42-4282
Attaches to 1080p HD HERO cameras featuring the
rear HERO Port
Simple one button design allows for easy on/off
and playback control
Normal speed, fast forward, and fast reverse
video and photo playback
Integrated speaker with volume control
Includes:
1 LCD BacPac screen
1 Waterproof LCD backdoor for HD HERO housing
1 Waterproof LCD backdoor for HD Wrist housing
1 Non-waterproof LCD Skeleton backdoor for HD
HERO housing
1 Non-waterproof LCD Skeleton backdoor for HD
Wrist housing
1 Year Warranty
NOTE: Not compatible with the HD Hero 960 camera.
The LCD BacPac is a detachable LCD screen for your 1080p HD HERO
camera. As a removable accessory, the LCD BacPac keeps your camera as small and
light as possible, yet provides the convenience of an LCD screen when attached.
3D Hero System -- $99.99
42-4256
Mounting System is
compatible with all GoPro accessories
3D waterproof housing is rated 180’/60m deep
Record 3D and 2D video and photo files
simultaneously
Includes FREE easy-to-use 3D editing software—GoPro
CineForm Studio
Prevent your camera’s housing from fogging, even in cold
temperatures/humid environments. Great value and performance: includes 3 sets of
anti-fog inserts. Each set lasts 4-5 uses and can be dried in an oven (3
minutes) and used again.
HD Skeleton Housing -- $39.99
42-4264
Features open sides that allow for easy plugging in of cables for
live feed video out of the camera, charging the camera with a USB cable while
recording video or photos, significant cooling when running the camera in
extremely hot environments where camera cooling is a concern, and enhanced sound
recording when used in non-windy locations like a race car, concert, jam
session, etc. Use the HD Skeleton Housing in dry environments only. Your HD HERO
camera is NOT waterproof when used with the HD Skeleton Housing. Camera NOT
included.
1 HD Skeleton Housing for HD HERO cameras
1 Horizontal Surface Quick-Release Buckle
Warranty: One Year
Replacement Quick Release Camera Housing-Reg. Lens
-- $39.95
42-4292
Replacement quick-release housing for all HD HERO cameras.
Waterproof to 180 ft/60 meters. For use with HD (high definition) HERO camerasonly.NOTfor
use with standard definition HERO and HERO Wide cameras.
1 Shockproof/Waterproof
Quick-Release HD Housing
1 Horizontal Surface Quick-Release Buckle
Warranty: One Year
HD
Lens Replacement Kit -- $19.99
42-4275
Kit comes with two replacements for the wide-angle
glass lens covers which used on all wide-angle HERO housings.
Compatible with all Wide Angle GoPro cameras…including the Helmet
HERO Wide, Motorsports HERO Wide, Surf HERO, and WIDE HERO cameras. *NOT*
compatible with Standard Angle cameras.
If you want to expand your mounting options for you Motorsports
HERO Wide, Motorsports HERO, Helmet HERO WIDE, Surf HERO, or Wide HERO
camera…this bag will set you up. It includes 1 flat surface base plate, 1 curved
base plate, a thumb knob and stainless steel hardware, 1 quick release buckle, 1
pivot arm assembly, 1 quick-release vibration plug, 1 leash tether, and a
vertical J mount for mounting your camera on a vertical wall surface like a car
bumper, wall, back of helmet, or similar.
1 Flat, 3M™ Adhesive Mount
1 Curved, 3M™ Adhesive Mount
1 Horizontal Surface Quick-Release Buckle
1 Vertical Surface J-Hook Buckle
1 Thumb Knob with Nut and Bolt
1 Pivot Arm Assembly
1 Quick-Release/Vibration Plug
1 Leash Tether
Warranty: One Year
Rollbar Mounting Kit -- $29.95
42-4295
Roll bar tube clamp for
mounting your quick-release GoPro camera on to tubes & frames ranging from 1.4″
to 2.5″ (3.5cm – 6.35cm) in diameter.
Perfect for clamping your camera to the radiator cap (both metal
and plastic caps) on karts.
You can also clamp to bike frames, bumper bars, ski/surfboard
racks, or anything else that is in the size range above. Comes with pivoting
orientation arms allowing for 3-way adjustability, ensuring you can get the
angle you want. Compatible with all GoPro quick-release cameras including the
Helmet HERO Wide, Motorsports HERO Wide, Motorsports HERO, Surf HERO, and WIDE
HERO cameras. Not compatible with the Digital HERO 5 Wrist Camera.
1 Roll Bar/Tube Clamp
1 Three-way Adjustable Pivot Arm (three piece assembly)
Warranty: One Year
Suction Cup Mount -- $29.99
42-4267
Industrial strength suction cup for your quick-release HERO
camera. This is the suction cup mount that comes with the Motorsports HERO and
Motorsports HERO Wide cameras. Strong enough to pull dents out of a car door
(unfortunately tested and proven by GoPro) or stay attached to an airplane at
200mph+, proven though not endorsed by GoPro per FAA rules.
Perfect if you own a Helmet HERO, Surf HERO, or Wide HERO camera
and want to add a suction cup mount to your arsenal. Attaches to cars,
motorcycles, snowmobiles, cockpits, you name it.
NOT RECOMMENDED for surfboards, snowboards or other high-impact
sports. Only recommended for non-impact activities.
1 Suction Cup Camera Mount
1 Rotational Joiner Arm
Warranty: 1 Year
Handle Bar/Seat Post Mounting Kit -- $20.00
42-4291
TheRide
HEROis
a tube clamp for mounting your quick-release GoPro camera on to bicycle
handlebars, seatposts, frames or any pole ranging from 0.75″ to 1.4″ (1.9cm –
3.5cm) in diameter.
You can also clamp to chainstays, small roll bars, bolt-heads,
windsurfing and kitesurfing control bars, or even use to create a handheld boom
– any pole that is in the size range above.
Comes with pivoting orientation arms allowing for 3-way
adjustability, ensuring you can get the angle you want. Compatible with all
GoPro quick-release cameras including the Helmet HERO Wide, Motorsports HERO
Wide, Motorsports HERO, Surf HERO, and WIDE HERO cameras. Not compatible with
the Digital HERO 5 Wrist Camera.
1 Bicycle Handlebar / Seatpost Clamp
1 Three-way Adjustable Pivot Arm
Warranty: 1 Year
Chest Mounting Harness -- $39.99
42-4290
Chest harness for your quick-release HERO camera. Makes it easy
to capture immersive video and photo footage from, well…your chest. Perfect for
skiing, mountain biking, motocross, paddle sports, or any activity where you
want to get a “lower than the helmet” view of the action. See more of your arms,
knees poles, and skis while skiing…or your arms and handlebars while biking or
riding your motorcycle. Recommended as a more immersive way to film than on the
helmet.
One size fits all adjustability.
Compatible with all GoPro quick-release cameras including the
Helmet HERO Wide, Motorsports HERO Wide, Motorsports HERO, Surf HERO, and WIDE
HERO cameras. Not compatible with the Digital HERO 5 Wrist Camera.
1 Adjustable Chest Harness
1 Vertical Surface “J-Hook” Buckle
Warranty: 1 Year
HD Wrist Housing -- $39.99
42-4279
Allows you to wear your HD HERO camera on your wrist like a
watch. Camera pivots upright to shoot videos or photos, but stays securely
attached to your wrist even in this position. Fits over ski gloves and jackets,
too. Perfect for surfing or snorkeling, hiking or climbing, the HD Wrist Housing
makes it easy to have a camera on hand for video and photo opportunities that
occur at times when traditional cameras are too inconvenient to use or carry. No
pockets? No problem if you are wearing the HD Wrist Housing. The
water housing is waterproof to 180′/60 meters. The housing can also be strapped
to gear such as kayak paddles and the leading edge of kitesurfing kites. This
allows the kitesurfer to film their entire session looking down from above, as
though they had a private helicopter camera crew following them while they surf.
The HD Wrist Housing has an adjustable neoprene strap that fits a range of sizes
from a child’s wrist to fitting over the ski jacket sleeve of an adult. NOT
compatible with older, standard definition HERO Cameras.
1 HD Wrist Housing
1 Neoprene and Velcro® Wrist Strap (One Size Fits All)
Warranty: 1 Year
Standard Night Vision Mount -- $29.99
42-4265
The NVG Mount conveniently attaches HD HERO cameras to any
military or police helmet outfitted with an NVG (Night Vision Goggle) mounting
plate. Compatible with all GoPro quick-release cameras including the HD HERO, HD
HERO 960 and the Wide HERO camera.
NVG Mounting Plate (1)
Thumb Knob (1)
Tri-Pod Mount -- $7.99
42-4278
Tripod mount for attaching your quick-release GoPro camera to a standard tripod.
Compatible with all GoPro quick-release cameras including the Helmet HERO Wide,
Motorsports HERO Wide, Motorsports HERO, Surf HERO, and WIDE HERO cameras. Not
compatible with the Digital HERO 5 Wrist Camera.
1 Tripod Mount
Warranty: One Year
Head Strap Mount -- $14.99
42-4277
Head strap mount for your quick-release HERO
camera. One size fits all adjustability. Compatible with all GoPro quick-release
cameras including the Helmet HERO Wide, Motorsports HERO Wide, Motorsports HERO,
Surf HERO, and Wide HERO cameras. NOT compatible with the Digital HERO 5 Wrist
Camera.
1 Adjustable Head Strap Mount
Warranty: 1 Year
Vented Helmet Strap -- $14.99
42-4276
Vented helmet strap for your quick-release
HERO camera. One size fits all adjustability. Compatible with all GoPro
quick-release cameras including the Helmet HERO Wide, Motorsports HERO Wide, Motorsports
HERO, Surf HERO, and WIDE HERO cameras. NOT compatible with the Digital HERO 5
Wrist Camera.
1 Adjustable Strap for Vented Helmets
Warranty: 1 Year
Flat Adhesive Mounts (5 each) -- $19.99
42-4269
These are the same mounts already included
with most HERO and HD HERO cameras. This package includes five flat, 3M™
adhesive mounts. 3M’s innovative VHB 4991 adhesive backing ensures the mounts
stay put, but can be cleanly removed when heat (eg. from a hairdryer) is
applied.
5 Flat, 3M Adhesive Mounts
Warranty: One Year
Curved Adhesive Mounts (5 each) -- $19.99
42-4268
These are the same mounts already included with most HERO and HD HERO
cameras. This package includes five curved, 3M™ adhesive mounts. 3M’s innovative
VHB 4991 adhesive backing ensures the mounts stay put, but can be cleanly
removed when heat (eg. from a hairdryer) is applied.
5 Curved, 3M Adhesive Mounts
Warranty: 1 Year
Helmet Front Mount -- $12.99
42-4266
Allows for low-profile positioning of your camera on the front of your
helmet, like a headlamp. Also extends out in front of the helmet so you can turn
the camera back on yourself for self-portrait videos and photos.
www.utvpartsandaccessories.com website and all of its content are
copyrighted materials, protected by U.S. and international copyright laws.
The compilation of content on this website is the exclusive property of it's
owners. All trademarked names, manufactures pictures, logos and information
belong to their respective owners. Content may not be used for any purpose
other than for your own private use, such as browsing, shopping, and using
the services and information provided.
www.utvpartsandaccessories.com and www.mammoth800parts.com is
a Division of Couper's Classic Cars seewww.coupersclassiccars.com
.
