Polaris Ranger Front and Rear Windshields

Front Windshields

Windshield Pictured on a Rhino

UTV Front Windshield,  Polaris Ranger, 55"x26", Black
$49.99

 
Instant shield against wind and rain. Super-clear vinyl window framed with heavy-duty ProtekX Extreme fabric. Rolls up for storage. Fits in seconds to the roll cage with four cinch-tight straps and rip-and-grip closure tabs. Two year warranty.

  Instruction Info | Warranty Info

Ventilated Windshield w/ Ducted Panel for Polaris Ranger
$299.99 $269.99 On Sale!
30064

This windshield offers much needed ventilation and seals the area between it and the hood. This way no unwanted dust, water, mud, etc., can find it’s way through. But sometimes we want air coming thru, so we installed separate driver and passenger zip open ducts to provide air circulation into the cab. You control the airflow when you want it! Zip them open, roll them up and they velcro nice and neatly so they don’t flap around.

• Impact resistant acrylic

• UV resistant PVC coated denier nylon lower panel

• Fully seals area between hood and windshield

• Passenger & driver zip open ventilation ducts

• Makes complete cab enclosure with Seizmik door & soft top kits

• Integrates with Seizmik light bar kits

• Seizmik Doors, tops, and lightbar kits (sold separately)

• Easily installs without drilling
   

What is the most common complaint about riding off-road in a side x side vehicle?  I’ll bet you said “the DUST”. The unique two-piece design of the CoolFlo windshield delivers relief from back draft dust while providing superior face and eye protection.  It also helps by reducing cabin temperature. Trail Armor’s CoolFlo Windshields are made of mar-resistant polycarbonate, provide excellent face and eye protection and relieves the dust and heat for a comfortable ride. They are easy to install, and the lower section can be removed and replaced on the fly.

EMP Half Windshield for Polaris Ranger
$169.99 $149.99 On Sale!
EMP9319

• 1/4 inch thick Lexan.

• Includes: mounting hardware and intructions.

• Protects from wind and brush.

• Rubber coated stainless steel mounting straps.

• 18 inches high.

• Fits: XP700, 4x4, 6x6, and others with the same roll cage (2005-2008 Models only)

This is an excellent alternative to a full windshield. The problem with a full windshield is that once you get mud or dirt on the top half you can't see anymore. This shield will give you protection from wind and brush but still ensure that you always have a clear view.

EMP Full Windshield for Polaris Ranger
$269.99 $229.99 On Sale!
EMP9885

Polaris Ranger 2005-2008 Full Tilt Windshield

$599.00 $499.00 On Sale!
KOL-2611
 

Hitting the trails shouldn’t mean a cab full of dust, a face full of mud, or having to pick bugs out of your teeth. This unique full-tilting design protects you from debris and mud while providing maximum ventilation, especially in those hot summer months. The versatile three-position tilt mechanism allows you to adjust the windshield to fully closed, half extension and full extension while also providing the ability to quickly release the top windshield piece – it’s like getting three windshields for the price of one! Constructed of ultra-thick, high quality, scratch resistant ¼” MR10 GE Lexan Polycarbonate - this is the toughest windshield available!

• Extremely durable – clamps are custom injection molded

• All stainless steel, black-coated finish hardware

• Super smooth edges

• Easy to install – NO Drilling required!
   

Shown on a Prowler

Manufactured from premium .177 thick optically
clear polycarbonate material
• Hinged to allow for use in either up or down position
• Tool-less operation
• Trailerable at normal highway speeds in the up position
• Rubber-coated stainless steel mount straps are used to attach to roll cage
• Includes instruction sheet and all mounting hardware needed for assembly

NOTE: PLEASE ALLOW 1-2 WEEKS FOR PRODUCTION ON YOUR HANDMADE UTV ACCESSORY

MADE IN USA

Mammoth Designs Polaris Ranger 2005-2008 500 700 4x4 XP 4x2 6x6 Folding Lexan Polycarbonate Windshield
 

$299.00 $259.99 On Sale!
 

Polaris Ranger 4x4 XP 4x2 500 Custom Hard Folding Windshield is constructed of Lexan Polycarbonate! Lexan is nearly bulletproof.  Our 3/16" thick windshield gives you the durability & performance you expect from Mammoth Designs UTV Accessories. Windshield is attached using completely stainless steel hardware that will not rust! Premium rubber gasket runs the length of the windshield to ensure a seamless fit against the hood. Living hinge runs full width of windshield allowing you to fold up & secure with velcro tabs for increased ventilation. Easy to Install ! Comes w/ installation and care instructions.

Kolpin Polaris Ranger 2005-08 / 2009 Specific Half-Folding Windshield -- $359.99

KOL2610
 

• Convenient half-folding design
   

• 1/4” abrasive-resistant GE Lexan MR10
   

• Injection-molded clamps and hinges
   

• Black coated finish hardware
   

• Easy to install
   

• Lip on upper shield deflects air over operator and passenger

Kolpin Polaris Ranger 400/Electric Rear Windshield -- $249.99 $229.99

KOL3631
 

• Provides an effective barrier to keep debris from entering the cab

• 1/8” FMR GE Lexan rear shield

• Extremely durable injection molded clamps

• All stainless steel, black coated finish hardware

• Easy installation

Solid

Mesh

VDP Polaris Ranger Black Mesh Wind Stopper -- $49.99 $42.99
 

VDP Polaris Ranger Solid Wind Stopper -- $59.99 $54.99
 

(Please Note: Shown on a Yamaha Rhino)

Now you can stay cool without the wind! This is a great way to reduce wind turbulence. The Wind Stopper is made from durable, weather resistant, high tech mesh material. Installs easily with hook and loop fasteners to the roll bar and works with any brief or full top

For 2003-2010 Polaris Rangers

Works Great With VDP Brief Tops- Visit the Ranger Roll Cage Top Page to Purchase

(Rear Window Pictured on a Rhino)

UTV Rear Window, Polaris Ranger - Black
$45.99

 
Instant shield against wind and rain. Super-clear vinyl window framed with heavy-duty ProtekX Extreme fabric. Rolls up for storage. Fits in seconds to the roll cage with four cinch-tight straps and rip-and-grip closure tabs. Two year warranty. (Will also fit a Ranger Crew)

Polaris Ranger Rear Windshield
$264.49 $239.99 On Sale!
KOP-2612
 

Constructed of .125 FMR abrasive resistant GE Lexan Polycarbonate, this rear windshield is cut with superior CNC 5-axis router so all the edges are super smooth. Extremely durable design as the clamps are custom injection molded and hold tight over every rough mile. Very easy to install – No drilling required

• All stainless steel hardware and instructions included 

Please see application chart for Polaris Ranger models