|
|
||||||||||||||||
 |
||||||||||||||||
| Gift Certificates | ||||||||||||||||
|
|
||||||||||||||||
|
|
||||||||||||||||
|
Free shipping on Al's Liner
|
||||||||||||||||
|
|
||||||||||||||||
|
Free shipping on Hand Controls for Disabled UTV Users |
||||||||||||||||
|
|
||||||||||||||||
 |
||||||||||||||||
| Cab Heaters | ||||||||||||||||
|
|
||||||||||||||||
|
|
||||||||||||||||
|
|
||||||||||||||||
|
Free Shipping this Month on Winches |
||||||||||||||||
|
|
||||||||||||||||
|
Audio Consoles Free Shipping this Month on Tractor Tunes Stereos |
||||||||||||||||
|
|
||||||||||||||||
|
|
||||||||||||||||
|
|
||||||||||||||||
|
|
||||||||||||||||
|
|
||||||||||||||||
|
|
||||||||||||||||
|
|
||||||||||||||||
|
|
||||||||||||||||
|
|
||||||||||||||||
|
|
||||||||||||||||
|
|
||||||||||||||||
|
|
||||||||||||||||
|
|
||||||||||||||||
|
Other Makes of UTVS
|
||||||||||||||||
|
|
||||||||||||||||
|
|
||||||||||||||||
|
|
||||||||||||||||
|
|
||||||||||||||||
|
|
||||||||||||||||
|
|
||||||||||||||||
|
|
||||||||||||||||
|
For Returned and Overstocked items at reduced prices |
||||||||||||||||
|
|
||||||||||||||||
|
See Our Little Farm |
||||||||||||||||
 |
||||||||||||||||
| 100% Pure Maple Syrup | ||||||||||||||||
|
Contact, Return and Shipping Policy Information
|
Polaris RZR Parts and Accessories
|
Click on the Name of the Items below that you are looking for.
|
||||
|
NEW! Pro
Armor RZR Doors and Accessories |
 |
|
Cab Heater |
Back to Top of Page | |||||
|
Under Dash Model
Under Dash Upright Model
Please Note: These heaters are in high demand and we are building the kits as fast as we can! The heater kits will ship 1-2 weeks after order is placed.
|
UTV Parts Polaris RZR Heater Under Dash
Cab Heater for Polaris RZR (Under Dash) $299.99
Cab Heater for Polaris RZR (Upright) -- $299.99
Cab Heater Defrost Duct Kit -- $39.99 Use your cooling system to heat your cab. Our in cab heater has a nice Glass-filled Nylon housing with rounded corners ... won't cut your legs up on sharp corners bouncing down the trial. Two speed fan will deliver 200CFM from the 13,200 BTU heater unit. Four adjustable louvers directs the heat were you need it. Both models mount under the dash which leaves plenty of room for your feet. Comes with templates, mounting bracket, hoses, custom Y fittings, shut off valve, clamps, hardware, wiring etc with instructions.
Universal Heater Kit pictured below (mounting brackets not shown)
|
|||||
|
Please Note: These heaters are in high demand kits will ship approx. 1 week after order is placed. |
RZR or RZR S Heater Kit with Defrost RZR or RZR S with factory power steering Heater Kit with Defrost
Use your Cooling System to heat your cab of your RZR with this Heater Kit with defrost vents to keep your windshield clear. Mounts directly to existing holes. Steel Powder Coated Case. 3 speed Spal Blower (3 year warranty) 4 adjustable louvers.
|
|||||
|
|
RZR, RZR S Cab Heater Kit
16,000 BTU Heater Will not work with power steering. |
|||||
| Back to Top of Page | ||||||
|
|
RZR Windshield $49.99 18-012-010401-00
|
|||||
|
|
Windshield- Full for Polaris RZR Out of Stock
|
|||||
|
|
CoolFlo Windshield for Polaris RZR TA010SHLD-RZR 
 What is the most common complaint about riding off-road in a side x side vehicle? I’ll bet you said “the DUST”. The unique two-piece design of the CoolFlo windshield delivers relief from back draft dust while providing superior face and eye protection. It also helps by reducing cabin temperature. Trail Armor’s CoolFlo Windshields are made of mar-resistant polycarbonate, provide excellent face and eye protection and relieves the dust and heat for a comfortable ride. They are easy to install, and the lower section can be removed and replaced on the fly. |
|||||
|
Click Images to Enlarge
|
EMP"Cooter Brown" RZR Windshield
Made from hard coated MR-10 this is probably the last windshield you will ever buy for your RZR. MR-10 sheet provides extended service life. It has excellent clarity and durability, and is lightweight. It will withstand -40 degrees F to 270 degrees F. It is non-formable and UV resistant. LEXAN MR10 sheet is mar- and graffiti-resistant. It combines the impact strength of LEXAN polycarbonate sheet with a proprietary abrasion and UV-resistant MARGARD® II surface. This windshield features quick connect clamps. You can easily remove the windshield without any tools. Simply remove the four thumbscrews and it is ready to be installed again. Pictured with optional windshield wiper (not included).
Watch the demo video by
clicking here.
|
|||||
|
|
EMP Half Windshield w/ Quick Connect Clamps for Polaris
RZR
|
|||||
|
|
EMP Tinted Half Windshield w/ Quick Connect Clamps for Polaris RZR
|
|||||
|
|
EMP Full Windshield for Polaris RZR
|
|||||
|
|
Kolpin RZR Full Tilting Windshield
|
|||||
|
|
RZR Full Windshield with Vent
|
|||||
|
|
RZR Half Fixed Windshield
This unique half-fixed design windshield protects you from debris and mud while providing maximum ventilation, especially in those hot summer months or warmer climates. Constructed of ultra-thick, high quality, scratch resistant ¼” MR10 GE Lexan Polycarbonate - this is the toughest windshield available!
|
|||||
|
|
Mammoth Designs Polaris RZR 800 Lexan Windshield
Polaris Ranger RZR 800 Hard Lexan Windshield is constructed of Lexan Polycarbonate! Our unique custom design surrounds the flush fitting windshield with a professional grade rubber gasket. This minimizes any trail noise and enhances the overall performance of our windshield. Lexan is nearly bulletproof. Our windshield is 3/16" thick, giving you the durability and performance you expect from Mammoth Designs UTV Accessories. Windshield is securely attached using 6 rust-resistant, rubber-lined, stainless steel clamps. Easy to Install ! No special tools required. Comes complete with installation and care instructions.
|
|||||
| Back to Top of Page | ||||||
|
|
Maier Polaris RZR Plastic Roof Please Select a Color: |
|||||
|
|
RZR Combination Roof/Windshield/ Rear Window $141.99
Fits over the UTV roll cage to protect against rain, snow, sun, and wind.
Made of heavy-duty UV resistant ProtekX™ Extreme fabric with PVC backing for
extreme weather and abrasion protection. Features large ultra-clear PVC
windshield and back window for excellent visibility. Mounts to the roll cage
with rip-and-grip closure tabs and self-adhesive tape strips. Windshield unzips
for easy removal for no window option. Rear window opens, rolls down and secures
with rip-and-grip straps. Two year warranty. |
|||||
|
|
UTV Roll Cage Top RZR-4
$63.99 Overhead protection against the elements
|
|||||
|
Windshield easily detaches and Rear window unzips, rolls down and secures with rip-and-grip straps |
UTV Roll Cage Top with front and rear windows for Polaris® RZR-4 $159.99 
Provides heavy-duty protection from weather conditions Fits over the UTV roll cage to protect against rain, snow, sun and wind Large ultra-clear vinyl windshield and back window for excellent visibility Mounts to the roll cage with rip-and-grip closure tabs and self-adhesive tape strips Windshield easily detaches for no windshield option Rear window unzips, rolls down and secures with rip-and-grip straps
|
|||||
|
|
RZR Sport Roof
Give yourself a break from the sun’s rays or rain with this convenient and stylish roof. The design blends perfectly with your RZR’s existing body style making it look like it came off the assembly line installed. The foam filled polymer construction provides rigidity and acts as an insulator to cut down on heat transference. Easily install using existing mounting points and all stainless steel hardware is included.
|
|||||
|
|
|
|||||
|
|
|
|||||
| Back to Top of Page | ||||||
|
2008-2010
2011 800/900 |
Polaris RZR Rear Shield Back Panel Combo Fits Models 2008-2011:
Fits 2011 800 Model:
KOL2035 Fits 2011 900 Model:
KOL2030
Rear Shield Features:
Bottom Panel Features: |
|||||
|
|
||||||
| Back to Top of Page | ||||||
|
NOTE: These cab are custom made to order and will be shipped within two week of the order date |
|
|||||
| Back to Top of Page | ||||||
|
|
Classic Accessories Polaris RZR - UTV Roll Cage Organizer -- $79.99
CA-18-014-010401-00 Stows essentials across the back or overhead of roll cage
|
|||||
|
|
UTV Seat Covers
for Polaris RZR
|
|||||
| Back to Top of Page | ||||||
 Note: The bottom of the bumper mounts to where the fair lead would mount on a stock winch mount. Therefore, when you use this bumper you have to mount your winch on top |
RZR Extreme Front
Bumper with top mounted winch plate.
EMP10436
Fits: 2008-2011 RZR, RZR-S, and RZR-4
will not fit the RZR XP900
This bumper bumper has some unique features
compared to others on the market. The mounting brackets attach
behind the radiator protecting the radiator
from smashing during an accident. Also, you can mount a winch on top.
Keeping it out of the water and mud.
|
|||||
 Note: the shrouds below the headlights have to be removed to install this bumper. I lot of guys cut holes in them for the arms to go through. |
RZR XP900 Front Bumper With Winch Mount EMP11079
Add protection, style, and a winch mount to the front of your RZR XP900 with this bumper. The bumper mounts in front of your radiator and allow you to mount up to a 3000 lb winch on top. Install in minutes without any drilling or cutting.
|
|||||
|
|
Trail Armor Polaris RZR Front Bumper TA004FBMP-RZR
Trail Armor's custom built front bumper / pre-runner light bar for the Polaris Ranger RZR, RZR S and RZR 4.
|
|||||
| Back to Top of Page | ||||||
|
|
Trail Armor Polaris RZR4 Debris and Mud Shields --
$954.95 TA001BLK-RZR4 With Trail Armor’s custom built half-door style debris shields and mud guards for the Polaris RZR4, you can enjoy Mother Nature, not wear her. They are made of 5/8 solid high density polymer and requires NO DRILLING of your roll cage. Door hanger and strike plates mount on existing factory holes and, unlike sheet metal door panels, our door panels will not rust, ding, or bend. Graphic packages can be applied by simply heat flashing the plastic and do not require any special chemical prep. Set features rotary door latches and powdercoated hinges and strike plates. All exterior fasteners are black zinc for a clean, professional look. Front doors open suicide and rear doors open on a front swinging hinge for easy full extension entry/egress. The tight-fitting, slim-line profile allows for navigation in tight spots with nothing to hang on and minimal gaps for mud and debris to come in. Additionally, these are the only doors on the market that you can adjust around any inconsistencies in how your roll cage was welded up by the manufacturer. Door panels install quickly and easily with photo-documented installation instructions. Lightweight and durable, these shields have the factory-like fit and finish that Trail Armor is known for. |
|||||
|
|
Trail Armor RZR and RZRS Debris and Mud Shields --
$489.00 TA001BLK-RZR
With Trail
Armor’s custom built half-door style debris shields and mud
guards for the Polaris RZR and RZRS, you can enjoy Mother Nature, not wear
her. They are made of 5/8 solid high density polymer and bolt to the roll
cage. Set features new rotary door latches and powdercoated hinges and
strike plates. They open straight out for easy entry/egress and the
slim-line profile allows for easier navigation in tight spots. Installs
easily with photo-documented installation instructions. Lightweight and
durable, these shields have a factory-like fit and finish.
|
|||||
|
|
Trail Armor RZR170 Debris and Mud Shields -- $459.00 TA001BLK-RZR170 With Trail Armor’s custom built half-door style debris shields and mud guards for the Polaris RZR170, you can enjoy Mother Nature, not wear her. They are made of 5/8 solid high density polymer and bolt to the roll cage. Set features new rotary door latches and powdercoated hinges and strike plates. They open straight out for easy entry/egress and the slim-line profile allows for easier navigation in tight spots. Installs easily with photo-documented installation instructions. Lightweight and durable, these shields have a factory-like fit and finish. |
|||||
|
|
Free Shipping On Pro Armor Doors
|
|||||
 Click Images to Enlarge  |
Free Shipping On Pro Armor Doors Pro Armor RZR Cut-Out Doors (Aluminum) -- Pro Armor RZR Cut-Out Doors (Black) -- Set of two doors, fits RZR and RZR S
|
|||||
|
Click on an Image to Enlarge |
Free Shipping On Pro Armor Doors Pro Armor RZR XP900 Doors w/ Sheet Metal (Set) Without Cut Outs These doors are all aluminum construction to save weight and ensure strength and durability for any type of riding or racing. The doors are direct bolt on to your RZR with no drilling. They have a 3 point mounting system making them the strongest and best design on the market period. The doors are available with sheet metal skins or nets and are fully interchangeable. The latch is a positive detent spring loaded latch and is easy to use. These doors not only make your ride look that much better with the state of the art design but also make it much easier to enter and exit your RZR. Installation is a breeze and only takes a few minutes. We offer these doors in brushed aluminum or powder coated black.
P081209
Pro Armor RZR XP900 Doors w/ Sheet Metal (Black) --
P081209BL
|
|||||
| Back to Top of Page | ||||||
|
|
RZR Overfenders
The perfect accessory for providing extra protection from flying debris and mud while greatly enhancing the look of your RZR. Constructed of 0.187” black HMW haircell polyrthylene that provides rigidity, yet is flexible enough to withstand the potential abuse an UTV rider can drum up. Custom design follows the natural lines of the existing fenders blending perfectly with your RZR’s existing body styling , so once installed they look like they came directly from the factory.
|
|||||
| Mirrors | ||||||
|
|
Seizmik
Side View Mirror (One Pair)
Available only in Black
S18041
|
|||||
|
|
Seizmik Black Exterior Mirrors (Pair, 1.75" Clamp)
|
|||||
|
|
Seizmik Silver Exterior Mirrors (Pair, 1.75" Clamp)
|
|||||
|
|
Seizmik Silver
Interior Mirror (1.75" Clamp) TR57-2031
|
|||||
|
Kolpin Rear/Side View Mirror Another industry first from Kolpin!! Our new Rear/Side UTV Mirror offers versatility and convenience with rear and/or side mounting options! Easy to adjust with the highly engineered quick-pivot design – you can quickly and easily angle the mirror out of the way of branches or out of the way of passengers while in the cab. The clamp design even allows overhead mounting in your UTV with a roof installed. The wide angle, convex lens provides high visibility over rough terrain as the over-molded grips help to reduce vibration. |
|||||
| Hitches | ||||||
 |
2" Ranger RZR Receiver Hitch
$99.99 KOL90260
|
|||||
 |
3 Way Hitch
|
