|
| |

Universal UTV Cab
Heaters
|

|
|
UTV Parts and
Accessories
Heater Kits for:
|
Universal Auto
Parts Heaters
Universal
RZR Heater Kits

Universal 12 Volt
12 Volt Electric Heater

|
|

UTV Parts and Accessories Heater Kits are custom made with
custom laser cut, powder coated mounting brackets to fit your model of UTV

All of our kits come with a compact yet
powerful heater unit with a 2
speed fan switch and four 360' adjustable louvers.
The heater unit has a powder coated steel base. The front
housing
is made from
glass-filled
nylon with rounded corners- it won't cut your legs on sharp metal corners
like some units! Kits are supplied with custom alloy Y connectors (kits
requiring 5/8" or 3/4" Y's are made from nylon). Kits also include hoses, EZ-Coils (used to stop
the hoses from kinking), hose
clamps, a hole saw (for the heater hoses), grommets, a shut off valve (others
don't bother to supply this item), a wiring loom
with a fuse and terminals included, templates, your specific mounting bracket with hardware, and
instructions.
Universal
Heater Kit pictured below

|
|

- Tube and fin water coil with limited lifetime warranty
- Glass-filled nylon housing
- Built in two speed fan control switch
- Heavy duty, long life motor
- Compact design
- Adjustable airflow louvers
- Mounting nuts and rubber gasket included
- 1 year warranty motor
- 6.0 amps @ 12v on High Speed
- 9 7/8 H X 7 3/8 W X 7 D
- Uses 5/8" hose
- 13,200 BTU / 200 CFM
|

UTV Parts
Universal Heater Kit
Cab Heater Universal UTV 1" -- $285.99

Cab Heater Universal UTV 5/8 and 3/4 -- $285.99

This is an outstanding universal heater kit.
Use your cooling system to heat your cab. Our
in cab heater has a nice
glass-filled
nylon housing with rounded corners- it won't cut
your legs up on sharp corners bouncing down the trial. The two speed fan will
deliver 200CFM from the 13,200 BTU heater unit. Adjustable louvers direct
the heat were you need it. Kit contains 6ft of 5/8 heater hose, shut
off valve, 10 clamps
and 2 custom alloy Y fittings (5/8-3/4 has nylon Y's). You supply
mounting bracket which can attach via the three mounting studs on the top
or bottom (it can be mounted in any direction) of the unit.
|
|

3" Duct Kit |
Universal 3" Cab Heater Defrost Duct Kit -- $39.99

Defrost Kit to defrost your windshield
Our
Duct kit comes with 2x 3" adjustable louvers, 2.5" duct hose, hose connectors, 3"
hole saw (yes even a hole saw) and cable ties.
|
|

2" Duct Kit |
Universal
2" Cab Heater Defrost Duct Kit -- $39.99

Defrost Kit to defrost your windshield
Our
Duct kit comes with 2x 2" adjustable louvers, 2" hose, hose connectors,
2" hole saw (yes even a hole saw) and cable ties
|


Please Note: These heaters
are in high demand and we are building the kits as fast as
we can! The heater kits will ship 1-2 weeks after order is placed. |
UTV Parts
RTV900 / RTV1140 Heater
Cab Heater for Kubota RTV1140 -- $299.99

Cab Heater for Kubota RTV900 -- $299.99

Use your cooling system to heat your cab. Our
in cab heater has a nice
Glass-filled Nylon housing with rounded corners- it won't cut
your legs up on sharp corners when you're bouncing down the trial. Two speed fan will
deliver 200CFM from the 13,200 BTU heater unit. Adjustable louvers direct
the heat were you need it. Mounts on the floor just left on center which
leaves plenty of room for your feet. Installation does require the drilling of 3 x 3/8"
mounting holes and two holes for the heater coolant hoses (hole saw
supplied). Comes with templates, hoses, custom Y fittings, a shut off valve,
clamps, hardware, wiring, instructions, and more.
- Tube and fin water coil with limited
lifetime warranty
- Glass-filled Nylon housing
- Built in two speed fan control switch
- Heavy duty, long life motor
- Compact design
- Floor Mount
- Adjustable airflow louvers
- Mounting hardware included
- 1 year warranty motor
6.0 amps @ 12v on High Speed
9 7/8 H X 7 3/8 W X 7 D
13,200 BTU / 200 CFM
|
|


Defrost Duct Kit

|

UTV Parts 09+
Polaris Ranger and 10+ Ranger Crew Heater
Cab Heater for 2009 + Polaris Ranger -- $299.99

Cab Heater for 2010 + Polaris Ranger Crew -- $299.99

2" Cab Heater Defrost Duct Kit -- $39.99

Use your cooling system to heat your cab! Our
in cab heater has a nice
glass-filled nylon housing with rounded corners- it won't cut
your legs up on sharp corners bouncing down the trial. Two speed fan will
deliver 200CFM from the 13,200 BTU heater unit. Adjustable louvers direct
the heat were you need it. It mounts on the floor which still leaves plenty
of room for your feet. Installation does require the drilling of 4 x 1/4
mounting holes and two holes for the heater coolant hoses (hole saw
supplied). Comes with templates, a mounting bracket, hoses, custom Y
fittings, shut off valve, clamps, hardware, wiring, instructions, and more.
- Tube and fin water coil with limited
lifetime warranty
- Glass-filled Nylon housing
- Built in two speed fan control switch
- Heavy duty, long life motor
- Compact design
- Floor Mount
- Adjustable airflow louvers
- Mounting hardware included
- 1 year warranty motor
6.0 amps @ 12v on High Speed
9 7/8 H X 7 3/8 W X 7 D
13,200 BTU / 200 CFM
Please Note: These heaters
are in high demand and we are building the kits as fast as
we can! The heater kits will ship 1-2 weeks after order is placed. |
|



Defrost Duct Kit |
10+
Ranger 400/500 and 500 Crew
Heater
10+ Ranger 400/500 and 500 Crew Heater -- $299.99

2" Cab Heater Defrost Duct Kit -- $39.99

Use your cooling system to heat your cab! Our
in cab heater has a nice
glass-filled nylon housing with rounded corners- it won't cut
your legs up on sharp corners bouncing down the trial. Two speed fan will
deliver 200CFM from the 13,200 BTU heater unit. Adjustable louvers direct
the heat were you need it. Mounts on the floor which still leaves plenty of
room for your feet. It does require the drilling of 4 x 1/4 mounting holes
and two holes for the heater coolant hoses (hole saw supplied). Comes with
templates, a mounting bracket, hoses, custom Y fittings, shut off valve,
clamps, hardware, wiring, instructions, and more.
- Tube and fin water coil with limited
lifetime warranty
- Glass-filled Nylon housing
- Built in two speed fan control switch
- Heavy duty, long life motor
- Compact design
- Floor Mount
- Adjustable airflow louvers
- Mounting hardware included
- 1 year warranty motor
6.0 amps @ 12v on High Speed
9 7/8 H X 7 3/8 W X 7 D
13,200 BTU / 200 CFM
|
|


Under Dash Model

Under Dash Upright Model

Defrost Vents
Please Note: These heaters
are in high demand and we are building the kits as fast as
we can! The heater kits will ship 1-2 weeks after order is placed.
|

UTV Parts Polaris
RZR Heater
Under dash
Cab Heater for Polaris RZR (Under dash) $299.99

Cab Heater for Polaris RZR (Upright) -- $299.99

Cab Heater Defrost Duct Kit -- $39.99


Duct Kit
Use your cooling system to heat your cab! Our
in cab heater has a nice
glass-filled
nylon housing with rounded corners- it won't cut your legs up on sharp
corners bouncing down the trial. Two speed fan will deliver 200CFM from the
13,200 BTU heater unit. Four adjustable louvers directs the heat were you
need it. Both models mount under the dash which leaves plenty of room for
your feet. Comes with templates, a mounting bracket, hoses, custom Y
fittings, a shut off valve, clamps, hardware, wiring, instructions, and
more.
Add our Duct Defrost Kit to defrost your windshield. The kit
comes with 2 adjustable louvers, duct hose, hose connectors, 3" hole saw,
a template, and instructions.
- Tube and fin water coil with limited
lifetime warranty
- Glass-filled Nylon housing
- Built in two speed fan control switch
- Heavy duty, long life motor
- Compact design
- Under Dash Mount
- 4 x Adjustable airflow louvers
- Mounting hardware included
- 1 year warranty motor
6.0 amps @ 12v on High Speed
9 7/8 H X 7 3/8 W X 7 D
13,200 BTU / 200 CFM
|


Please Note: These heaters
are in high demand and we are building the kits as fast as
we can! The heater kits will ship 1-2 weeks after order is placed. |
UTV Parts Kawasaki
Teryx Heater
Cab Heater for Kawasaki Teryx -- $299.99

Use your cooling system to heat your cab! Our
in cab heater has a nice
glass-filled
nylon housing with rounded corners- it won't cut your legs up on sharp
corners bouncing down the trial. Two speed fan will deliver 200CFM from the
13,200 BTU heater unit. Adjustable louvers direct the heat were you need it.
Mounts on the center console which leaves plenty of room for your feet. It
does require the drilling of 4 x 1/4 mounting holes. Comes with templates, a
mounting bracket, hoses, custom Y fittings, a shut off valve, clamps,
hardware, wiring, instructions, and more.
- Tube and fin water coil with limited
lifetime warranty
- Glass-filled Nylon housing
- Built in two speed fan control switch
- Heavy duty, long life motor
- Compact design
- Console Mount
- Adjustable airflow louvers
- Mounting hardware included
- 1 year warranty motor
6.0 amps @ 12v on High Speed
9 7/8 H X 7 3/8 W X 7 D
13,200 BTU / 200 CFM
|


Please Note: These heaters
are in high demand and we are building the kits as fast as
we can! The heater kits will ship 1-2 weeks after order is placed. |
UTV Parts Kawasaki
4000/4010 Heater
Cab Heater for Kawasaki 4000 and 4010 -- $299.99

Cab Heater for Kawasaki 4010 Trans -- $299.99

Use your cooling system to heat your cab! Our
in cab heater has a nice
glass-filled
nylon housing with rounded corners- it won't cut your legs up on sharp
corners bouncing down the trial. Two speed fan will deliver 200CFM from the
13,200 BTU heater unit. Adjustable louvers direct the heat were you need it.
Mounts under the dash which leaves plenty of room for your feet. Comes with
templates, a mounting bracket, hoses, custom Y fittings, a shut off valve,
clamps, hardware, wiring, instructions, and more.
- Tube and fin water coil with limited
lifetime warranty
- Glass-filled Nylon housing
- Built in two speed fan control switch
- Heavy duty, long life motor
- Compact design
- Under Dash Mount
- Adjustable airflow louvers
- Mounting hardware included
- 1 year warranty motor
6.0 amps @ 12v on High Speed
9 7/8 H X 7 3/8 W X 7 D
13,200 BTU / 200 CFM
|
|

Please Note: These heaters
are in high demand and we are building the kits as fast as
we can! The heater kits will ship 1-2 weeks after order is placed.

Defrost Duct Kit
Typical kit
pictured above (mounting brackets not shown) |

UTV Parts
Can Am Commander Under Dash Heater
Cab Heater for Can-Am Commander -- $349.99

Cab Heater Switch Wiring Kit -- $9.99

Cab Heater Defrost Duct Kit -- $39.99


Duct Kit
Use your cooling system to heat your cab! Our
in cab heater has a nice
glass-filled
nylon housing with rounded corners- it won't cut
your legs up on sharp corners bouncing down the trial. Two speed fan will
deliver 200CFM from the 13,200 BTU heater unit. Adjustable louvers direct
the heat were you need it. Specially directed ducts and louvers deliver a heat to
passenger compartment. The heater mounts under the dash which leaves plenty of room for
your feet and can be removed quickly out of the way to gain access to
the battery or fuses etc. High/low/off switch gear matches the commander
switches and can be left on the heater or mounted in dash using our Switch
Wiring Kit. Comes with
templates, a mounting bracket, hoses, custom Y fittings, a shut off valve, clamps,
a hole saw, hardware, wiring, instructions, and more.
Add our Duct Defrost Kit to defrost your windshield which
comes with 2 adjustable louvers, duct hose, hose connectors, a 3" hole saw,
a template, and instructions.
- Tube and fin water coil with limited
lifetime warranty
- Glass-filled Nylon housing
- Built-in two speed fan control switch
- Heavy duty, long life motor
- Compact design
- Under Dash Mount
- Adjustable airflow louvers
- Mounting hardware included
- 1 year warranty motor
6.0 amps @ 12v on High Speed
9 7/8 H X 7 3/8 W X 7 D
13,200 BTU / 200 CFM
 |
|


Please Note: These heaters
are in high demand and we are building the kits as fast as
we can! The heater kits will ship 1-2 weeks after order is placed.
|
UTV Parts Yamaha
Rhino Under Dash Heater
Cab Heater for Yamaha Rhino -- $299.99

Use your cooling system to heat your cab! Our
in cab heater has a nice
glass-filled
nylon housing with rounded corners- it won't cut your legs up on sharp
corners bouncing down the trial. The two speed fan will deliver 200CFM from
the 13,200 BTU heater unit. Adjustable louvers direct the heat were you need
it. Mounts under the dash which leaves plenty of room for your feet. Comes
with templates, mounting bracket, hoses, custom Y fittings, a shut off
valve, clamps, hardware, wiring, instructions, and more.
- Tube and fin water coil with limited
lifetime warranty
- Glass-filled Nylon housing
- Built-in two speed fan control switch
- Heavy duty, long life motor
- Compact design
- Under Dash Mount
- Adjustable airflow louvers
- Mounting hardware included
- 1 year warranty motor
6.0 amps @ 12v on High Speed
9 7/8 H X 7 3/8 W X 7 D
13,200 BTU / 200 CFM
|
|
Universal Auto Parts Heaters
 |
| Use your Cooling
System to heat the cab of your UTV with this Universal Heater Kit (pictured
above).
Heater Dimensions:
10.25" Deep x 7.75" Wide x 5.25" High. Mounting
Brackets will lift the heater off the floor (or were ever you decide to
mount it) another 2" in height.
Please check the inside radiator hose diameter to determine the heater you
will need for your
UTV
before you order. |
Universal Cab Heater Kit for 3/4
Radiator Hose
$399.99 $339.99 On Sale!
Z4180

Universal Cab Heater Kit for 1"
Radiator Hose
$399.99 $339.99 On Sale!
Z4174

|


Please Note: These heaters
are in high demand and will ship approx. 1 week after
order is placed.
|
RZR or RZR S Heater Kit
with Defrost
RZR or RZR S Heater with Defrosters -- $399.00
$375.99

RZR or RZR S with factory
power steering Heater with Defrosters -- $499.99
$439.99
Use your Cooling
System to heat your cab of your RZR with this Heater Kit with defrost
vents to keep your windshield clear.
-
Mounts directly to existing holes.
-
Steel Powder Coated Case.
-
3
speed Spal Blower (3 year warranty)
-
4 adjustable louvers.
 |

 |
RZR, RZR S Cab
Heater Kit
RZR or RZR S Heater -- $379.00 $339.99

-
Mounts directly to existing holes, no
drilling required.
-
Steel Powder Coated Case.
-
3 speed Spal
Blower (3 year warranty) 4 adjustable louvers.
-
16,000 BTU Heater
Will not work with factory power
steering. |
|
12 Volt Electric Heater
$89.95 $47.99 On Sale!
A450001

Stay warm this winter with an all new 12v heater for your UTV. This heater
features a 3 position switch from heat to fan only. Rotate the top knob to
adjust the fan speed to your preference. Easy to install and complete with
installation instructions. Positive cable is fused.

Please Note: These heaters will not "cook a hotdog",
meaning that the output is very limited because they are only 300 watts max
output. 300 watts is equal to around 5 headlight bulbs. The output is also
limited by your battery and charging system. |
  |
|
If you need help with selecting your
Parts and Accessories please call
1
800 596 0785 or
Email
us, thanks. |
|